Scholarly Publications

In Peer Reviewed Journals: (59 in print or press; 46 at UA)

  1. M.L. Weaver and M.J. Kaufman, “An Investigation of Al2Ta and Related Phases in the Ternary Al-Ti-Ta System,” Scripta Metallurgica et Materialia, v.26, pages 411-416 (1992).  DOI: 10.1016/0956-716X(92)90621-K
  2. M.L. Weaver, M.J. Kaufman and R.D. Noebe, “The Effects of Alloy Purity on the Mechanical Behavior of Soft Oriented NiAl Single Crystals,” Scripta Metallurgica et Materialia, v.29, pages 1113-1118 (1993).  DOI: 10.1016/0956-716X(93)90187-W
  3. M.L. Weaver and M.J. Kaufman, “Application of a Method for Determination of the Internal Stress in Polycrystalline NiAl,” Scripta Metallurgica et Materialia, v.31, pages 745-750 (1994).  DOI: 10.1016/0956-716X(94)90221-6
  4. M.L. Weaver, R.D. Noebe, J.J. Lewandowski, B.F. Oliver and M.J. Kaufman, “The Effects of Interstitial Content, Heat Treatment, and Prestrain on the Tensile Properties of NiAl,” Materials Science and Engineering, v.A192/193, pages 179-185 (1995).  DOI: 10.1016/0921-5093(94)03233-5
  5. M.L. Weaver and M.J. Kaufman, “Phase Relationships and Transformations in the Ternary Aluminum-Titanium-Tantalum System,” Acta Metallurgica et Materialia, v.43, no.7, pages 2625-2640 (1995).  DOI: 10.1016/0956-7151(94)00468-W
  6. M.L. Weaver, M.J. Kaufman and R.D. Noebe, “Kinetics of Static Strain Aging in Polycrystalline NiAl-Based Alloys,” Intermetallics, v.4, no. 2, pages 121-129 (1996).  DOI: 10.1016/0966-9795(95)00027-5
  7. M.L. Weaver, R.D. Noebe and M.J. Kaufman, “The Influence of C and Si on the Flow Behavior of NiAl Single Crystals,” Scripta Materialia, v. 34, no. 6, pages 941-948 (1996).  DOI: 10.1016/1359-6462(95)00590-0
  8. M.L. Weaver, R.D. Noebe, J.J. Lewandowski, B.F. Oliver, and M.J. Kaufman, “Observations of Static Strain Aging in Polycrystalline NiAl,” Intermetallics, v. 4, no. 7, pages 533-542 (1996).  DOI: doi.org/10.1016/0966-9795(96)00040-4
  9. M.L. Weaver, R.D. Noebe, and M.J. Kaufman, “Observations of Dynamic Strain Aging in Polycrystalline NiAl,” Intermetallics, v. 4, no. 8, pages 593-600 (1996).  DOI: 10.1016/0966-9795(96)00045-3
  10. M.L. Weaver, M.J. Kaufman, A.J. Duncan, and R.D. Noebe, “Manifestations of Dynamic Strain Aging in Soft-Oriented NiAl Single Crystals,” Metallurgical and Materials Transactions A, v. 27A, no. 11, pages 3542-3557 (1996).  DOI: 10.1007/BF02595446
  11. X.D. Zhang, S. Godfrey, M. Weaver, M. Strangwood, P. Threadgill, M.J. Kaufman, and M.H. Loretto, “The Massive Transformation in Intermediate Ti-Al Alloys: Mechanistic Observations,” Acta Metallurgica et Materialia, v. 44, no. 9, pages 3723-3734 (1996).  DOI: 10.1016/1359-6454(95)00453-X
  12. M.L. Weaver and H. Garmestani, “Microstructures and Mechanical Properties of Commercial Titanium Foils Processed via the Melt Overflow Process,” Materials Science and Engineering A, v. A247, pages 229-238 (1998).  DOI: 0.1016/S0921-5093(97)00727-2
  13. M.L. Weaver, L.P.M. Brandao, E. S. Gillman, K. H. Dahmen, A. Morrone, and H. Garmestani, “Microcharacterization of Liquid Delivery Metalorganic Chemical Vapor Deposition Processed Thin Film Materials Exhibiting Giant Magnetoresistance,” Journal of Materials Research, v. 14, n. 5, pages 2007-2011 (1999).  DOI: 10.1557/JMR.1999.0271
  14. C. Ruby, R. Ott, F. Huang, M.L. Weaver and J.A. Barnard, “XPS Study of Reactively Sputtered Ti-B-N Hard Coatings,” Surface and Interface Analysis, v. 29, n. 12, pages 823-828 (2000).  DOI:  10.1002/1096-9918(200012)29:12<823::AID-SIA933>3.0.CO;2-C
  15. R.D. Ott, C. Ruby, F. Huang, M.L. Weaver, and J.A. Barnard, “Nanotribology and Surface Chemistry of Reactively Sputtered Ti-B-N Hard Coatings,” Thin Solid Films, v. 377-378, n.1-2, pages 602-606 (2000).  DOI: 10.1016/S0040-6090(00)01274-8
  16. C.L. Hale, W.S. Rollings and M.L. Weaver, “Activation Energy Calculations for Discontinuous Yielding in Inconel 718spf,” Materials Science and Engineering A, v. A300, n. 1-2, pages 153-164 (2001).  DOI: 10.1016/S0921-5093(00)01470-2
  17. F. Huang, J.A. Barnard, and M.L. Weaver, “Ultrathin TiB2 Protective Films,” Journal of Materials Research v. 16, n. 4, pages 945-954 (2001).  DOI: 10.1557/JMR.2001.0134
  18. F. Huang, G. Wei, J.A. Barnard, and M.L. Weaver, “Microstructure and Stress Development in Magnetron Sputtered TiAlCr(N) Films,” Surface and Coatings Technology, v. 146-147, pages 391-397 (2001).  DOI: 10.1016/S0257-8972(01)01424-4
  19. G. Wei, T.W. Scharf, J.N. Zhou, F. Huang, M.L. Weaver, and J.A. Barnard, “Nanotribology Studies of Cr, Cr2N and CrN Thin Films Using Constant and Ramped Load Nanoscratch Techniques,” Surface and Coatings Technology, v. 146-147, pages 357-362 (2001).  DOI: 10.1016/S0257-8972(01)01403-7
  20. F. Huang, W. J. Liu, J.F. Sullivan, J.A. Barnard, and M.L. Weaver, “Room Temperature Oxidation of Ultrathin TiB2 Films:  A New Perspective on its Potential as Protective Overcoats in Magnetic Recording,” Journal of Materials Research, v. 17, n. 4, pages 805-813 (2002).  DOI: 10.1557/JMR.2002.0118
  21. M.L. Weaver, C.W. Calhoun and H. Garmestani, “Microstructure, Texture, and Mechanical Properties of Continuously Cast Gamma TiAl,” Journal of Materials Science, v. 37, n. 12, pages 2483-2490 (2002).  DOI: 10.1023/A:1015431305538
  22. F. Huang, J.A. Barnard, and M.L. Weaver, “Mechanical Characterization of DC Magnetron Sputtered Amorphous Ti-Al-Cr Coatings,” Surface and Coatings Technology, v. 155, n. 2-3, pages 146-151 (2002).  DOI: 10.1016/S0257-8972(02)00060-9
  23. X. Liu, F. Huang, G. Zangari, M. Weaver, “Mechanical Properties of Soft Electrodeposited Fe-Co-Ni Films for Magnetic Recording Heads,” IEEE Transactions on Magnetics, v. 38, n. 5, pages 2231-2233 (2002).  DOI: 10.1109/TMAG.2002.802678
  24. G. Wei, M.L. Weaver and J.A. Barnard, “Nanotribological Studies of Chromium Thin Films,” Tribology Letters, v. 13, n. 4, pages 255-261 (2002).  DOI: 10.1023/A:1021301609386
  25. B. Ning, M.E. Stevenson, M.L. Weaver and R.C. Bradt, “Apparent Indentation Size Effect in a CVD Coated Ni-Base Superalloy,” Surface and Coatings Technology, v. 163-164, n. 1, pages 112-117 (2003).  DOI: 10.1016/S0257-8972(02)00604-7
  26. M.L. Weaver, M.E. Stevenson and R.C. Bradt, “Knoop Microhardness Anisotropy and the Indentation Size Effect on the (100) of Single Crystal NiAl,” Materials Science and Engineering A, v. 345, n. 1-2, pages 113-117 (2003).
  27. G. Wei, J. Gong, G. Zangari, M.L. Weaver, and J.A. Barnard, “Thin CNx Overcoats Deposited Using Various Sputtering Gases,” Journal of Applied Physics, v. 93, n. 15, pages 8710-8712 (2003).  DOI:  10.1063/1.1558185
  28. M. P. Brady, I.M. Anderson, M.L. Weaver, H.M. Meyer, L.R. Walker, M.K. Miller, D.J. Larson, I.G. Wright , V.K. Sikka, A. Rar, G.M. Pharr, J.R. Keiser, and C.A. Walls, “Nitrogen Impurity Gettering in Oxide Dispersion Ductilized Chromium,” Materials Science and Engineering A, v. 358, n. 1-2, pages 243-254 (2003).  DOI: 10.1016/S0921-5093(03)00324-1
  29. X. Li, M. Curry, G. Wei, J. Zhang, J.A. Barnard, S.C. Street, and M.L. Weaver, “Nanotribological Studies of Dendrimer-Mediated Metallic Thin Films,” Surface and Coatings Technology, v. 177-178, pages 504-511 (2004).  DOI: 10.1016/S0257-8972(03)00919-8
  30. B. Ning and M.L. Weaver, “A Preliminary Study of DC Magnetron Sputtered NiAl-Hf Coatings,” Surface and Coatings Technology, v. 177-178, pages 113-120 (2004).  DOI: 10.1016/j.surfcoat.2003.08.071
  31. B. Ning, M. Shamsuzzoha, and M.L. Weaver, “Microstructures and Properties of DC Magnetron Sputtered NiAl-Hf Coatings,” Surface and Coatings Technology, v. 179, n. 2-3, pages 201-209 (2004).  DOI: 10.1016/S0257-8972(03)00870-3
  32. X. Li, F. Huang, M. Curry, S.C. Street, and M. L. Weaver, “Improved Adhesion of Au Thin Films to SiOx/Si Substrates by Dendrimer Mediation,” Thin Solid Films, v. 473, n. 1, pages 164-168 (2005).  DOI: 10.1016/j.tsf.2004.07.080
  33. B. Ning, M. Shamsuzzoha, and M.L. Weaver, “Influence of Processing Variables on the Properties of DC Magnetron Sputtered NiAl Coatings Containing Hf Additions,” Journal of Vacuum Science and Technology A, v. 23, n. 1, pages 44-54 (2005).  DOI: 10.1116/1.1828085
  34. J.F. Sullivan, F. Huang, J.A. Barnard, and M.L. Weaver, “Effect of Nitrogen Pressure on the Hardness and Chemical States of TiAlCrN Coatings,” Journal of Vacuum Science and Technology, v. 23, n. 1, pages 78-84 (2005).  DOI: 10.1116/1.1830498
  35. M.P. Brady, B.L. Armstrong, H.T. Lin, M.J. Lance, K.L. More, L.R. Walker, F. Huang, and M.L. Weaver, “Feasibility Assessment of Self-Grading Metallic Bond Coat Alloys for EBCs/TBCs to Protect Si-Based Ceramics,” Scripta Materialia, v. 52, n. 5, pages 393-397 (2005).  DOI: 10.1016/j.scriptamat.2004.10.024
  36. J. Shi, F. Huang, M.L. Weaver, and T.M. Klein, “Effect of O2 Flow Ratio on the Microstructure and Stress of Room Temperature Reactively Sputtered RuOx Thin Films,” Journal of Vacuum Science and Technology, v. 23, n. 3, pages 452-459 (2005).  DOI: 10.1116/1.1875272
  37. Xiao Li, Feng Huang, M. Curry, S.C. Street, and M.L. Weaver, “Nanoscratch Behavior of Dendrimer-Mediated Ti Thin Films,” Tribology Letters, v. 19, n. 4, pages 273-280 (2005).  DOI: 10.1007/s11249-005-7444-6
  38. F. Huang and M.L. Weaver, “Biaxial Modulus of Fiber-Textured Cubic Polycrystalline Films with an Arbitrary Texture Axis <hkl>,” Journal of Applied Physics, v. 98, n. 7, paper 073505 [6 pages] (2005).  DOI: 10.1063/1.2067688
  39. M.P. Brady, P.F. Tortorelli, K.L. More, E.A. Payzant, B.L. Armstrong, H.T. Lin, M.J. Lance, F. Huang, and M.L. Weaver, “Coating and Near-Surface Modification Design Strategies for Protective and Functional Surfaces,” Werkstoffe und Korrosion (Materials and Corrosion), v. 56, n. 11, pages 748-755 (2005).  DOI: 10.1002/maco.200503875
  40. B. Ning, M. Shamsuzzoha, and M.L. Weaver, “Microstructure and Property Analysis of DC Magnetron Sputtered NiAl-0.6Hf Coatings,” Surface and Coatings Technology, v. 200, n. 5-6, pages 1270-1275 (2005).  DOI: 10.1016/j.surfcoat.2005.07.087
  41. A.W. Warren, Y. B. Guo, M. L. Weaver, “The Influence of Machining Induced Residual Stress and Phase Transformation on The Measurement of Subsurface Mechanical Behavior Using Nanoindentation,” Surface and Coatings Technology, v. 200, n. 11, pages 3459-3467 (2006).  DOI: 10.1016/j.surfcoat.2004.12.028
  42. F. Huang and M.L. Weaver, “Effective Biaxial Modulus of (hkl)-Fiber-Textured Hexagonal, Tetragonal, and Orthorhombic Films,” Journal of Applied Physics, v. 100, n. 9, paper 093523 [8 pages] (2006).  DOI: 10.1063/1.2364383
  43. M. Curry, X. Li, J. Zhang, M.L. Weaver, and S.C. Street, “Morphological and Structural Characterizations of Dendrimer-mediated Metallic Ti and Al Thin Film Nanocomposites,” Thin Solids Films, v. 515, n. 7-8, pages 3567-3573 (2007).  DOI:  10.1016/j.tsf.2006.11.018
  44. M. Curry, X. Li, F. Huang, M.L. Weaver, and S.C. Street, “A Tribological Study of Kinetically Influenced Ultrathin Au and Cu Metal Overlayers Grown on Dendrimer Mediated Si,” Tribology Letters, v. 25, n. 2, pages 133-140 (2007).  DOI: 10.1007/s11249-006-9130-8
  45. J.S. Burgess, C.K. Acharya, J. Lizarazo, N. Yancey, B. Flowers, G. Kwon, T. Klein, M. Weaver, A.M. Lane, C.H. Turner, and S. Street, “Boron-doped Carbon Powders Formed at 1000°C and One Atmosphere,” Carbon, v. 46, n. 13, pages 1711-1717 (2008).  DOI: 10.1016/j.carbon.2008.07.022
  46. C.K. Acharya, W. Li, Z. Liu, g. Kwon, C.H. Turner, A.M. Lane, D. Nikles, T. Klein, and M.L. Weaver, “Effect of Boron Doping in the Carbon Support on Platinum Nanoparticles and Carbon Corrosion,” Journal of Power Sources, v. 192, n. 2, pages 324-329 (2009).  DOI: 10.1016/j.jpowsour.2009.03.020
  47. M.A. Bestor, R.L. Martens, R.A. Holler, and M.L. Weaver, “Influences of Annealing and Hafnium Concentration on the Microstructures of Sputter Deposited β-NiAl Coatings on Superalloy Substrates,” Intermetallics, v. 18, pages 2159-2168 (2010).  DOI: 10.1016/j.intermet.2010.07.00
  48. M.A. Bestor, J.P. Alfano, and M.L. Weaver, “Influences of Chromium and Hafnium Additions on the Microstructures of β-NiAl Coatings Deposited on Superalloy Substrates,” Intermetallics, v. 19, pages 1693-1704 (2011).  DOI: 10.1016/j.intermet.2011.06.020
  49. E. Harvey, L. Ladani and M. Weaver, “Complete Mechanical Characterization of Nanocrystalline Al-Mg Alloy Using Nanoindentation,” Mechanics of Materials, v. 52, pages 1-11 (2012).  DOI: 10.1016/j.mechmat.2012.04.005
  50. T.T. Sasaki, B.C. Hornbuckle, R.D. Noebe, G. Bigelow, M.L. Weaver, and G.B. Thompson, “Effect of Aging on Microstructure and Shape Memory Properties of a Ni-48Ti-25Pd (at.%) Alloy,” Metallurgical and Materials Transactions A, v. 44, pages 1388-1400 (2013).  ISSN: 10735623;  DOI: 10.1007/s11661-012-1481-1
  51. J. Zhu, P. Henry, M.L. Weaver, M.L. Reed, and G. Zangari, “Enhanced Adhesion of Au Films by Electrodeposition onto Porous Si,” Journal of the Electrochemical Society, v. 160, pages D507-D512 (2013).  DOI: 10.1149/2.013311jes.
  52. B.C. Hornbuckle, T.T. Sasaki, G.S. Bigelow, R.D. Noebe, M.L. Weaver, and G.B. Thompson, “Structure-Property Relationships in a Precipitation Strengthened Ni-29.7Ti-20Hf (at%) Shape Memory Alloy,” Materials Science and Engineering A, v. 637, pages 63-69 (2015).  DOI:10.1016/j.msea.2015.03.123.
  53. B.C. Hornbuckle, X.X. Yu, R.D. Noebe, R. Martens, M.L. Weaver, and G.B. Thompson, “Hardening Behavior and Phase Decomposition in very Ni-rich Nitinol Alloys,” Materials Science and Engineering A, v. 639, pages 336-344 (2015).  DOI: 10.1016/j.msea.2015.04.079.
  54. T.M. Butler and M.L. Weaver, “Oxidation Behavior of Arc Melted AlCoCrFeNi Multi-component High-entropy Alloys,” Journal of Alloys and Compounds, v. 674, pages 229-244 (2016).  DOI: 10.1016/j.jallcom.2016.02.257.
  55. B. Hunter, X. Yu, N. DeLeon, C. Weinberger, C. Fahrenholtz, G. Hilmas, M. Weaver, and G. Thompson, “Investigations into the Slip Behavior of Zirconium Diboride,” Journal of Materials Research, v. 31, pages 2749-2756 (2016).  DOI: 10.1557/jmr.2016.201
  56. J.F. Liu, Y.B. Guo, T.M. Butler, M.L. Weaver, “Crystallography, Compositions, and Properties of White Layer by Wire Electrical Discharge Machining of Nitinol Shape Memory Alloy,” Materials & Design, v. 109, pages 1-9 (2016). DOI: 10.1016/j.matdes.2016.07.063.
  57. T.M. Butler and M.L. Weaver, “Influence of Annealing on the Microstructures and Oxidation Behaviors of Al8(NiCoCrFe)92, Al15(NiCoCrFe)85, and Al30(NiCoCrFe)70 High-Entropy Alloys;” Metals, v. 6, 222, 11 pages (2016). DOI: 10.3390/met6090222.
  58. T.M. Butler and M.L. Weaver, “Investigation of the phase stabilities in AlNiCoCrFe high entropy alloys,” Journal of Alloys and Compounds, v. 691, pages 119-129 (2017). DOI: 10.1016/j.jallcom.2016.08.121.
  59. R.E. White and M.L. Weaver, “Microstructural Investigation of the Thermally Grown Oxide on Grain-Refined Overdoped NiAl-Zr,” Oxidation of Metals, v. 92, pages 227-242 (2019).  DOI: 10.1007/s11085-019-09920-2.

In Peer Reviewed Conference Proceedings and/or Reports: (22 in print; 18 at UA)

  1. M.L. Weaver, S.L. Guy, R.K. Stone and M.J. Kaufman, “An Investigation of Phase Equilibria in the Ternary Al-Ti-Ta System,” in High Temperature Ordered Intermetallic Alloys IV, Materials Research Society Symposium Proceedings, v. 213, pages 163-168, Materials Research Society, Pittsburgh, PA (1991).
  2. M.L. Weaver, “Investigation of Strain Aging in the Ordered Intermetallic Compound b-NiAl,” NASA Contractor Report 198364, July (1995).
  3. M.L. Weaver, V. Levit, M.J. Kaufman and R.D. Noebe, “The Effects of Interstitial Content and Annealing on the Flow and Fracture Behavior of Polycrystalline b-NiAl,” in High Temperature Ordered Intermetallic Alloys VI, Materials Research Society Symposium Proceedings, v. 364, pages 425-430, Materials Research Society, Pittsburgh, PA (1995).
  4. M.L. Weaver, H. Garmestani and G. Das, “Texture Studies of Gamma Titanium Aluminide Sheets Produced By Melt Overflow Rapid Solidification,” in High Temperature Ordered Intermetallic Alloys VII, Materials Research Society Symposium Proceedings, v. 460, pages 243-248, Materials Research Society, Pittsburgh, PA (1997).
  5. M.L. Weaver, R.D. Noebe, and M.J. Kaufman, “Strain Aging Behavior in NiAl Microalloyed with Interstitial and Substitutional Solutes,” in High Temperature Ordered Intermetallic Alloys VII, Materials Research Society Symposium Proceedings, v. 460, pages 499-504, Materials Research Society, Pittsburgh, PA (1997).
  6. M.L. Weaver and H. Garmestani, “Microstructural and Mechanical Properties Evaluations of Titanium Foils Processed via the Melt Overflow Process,” in NASA ACE Center Series: Proceedings of the NASA University Research Center Technical Conference on Education, Aeronautics, Space, Autonomy, Earth and Environment (URC_TC’97), ACE Center Press, Albuquerque, NM, vol. 1, pages 925-929 (1997).
  7. M.L. Weaver, J. Hu and R.D. Noebe, “Static and Dynamic Strain Aging in Microalloyed NiAl-Based Alloys,” in Proceedings of the Second International Symposium on Interstitial and Substitutional Solute Effects in Intermetallics, The Minerals, Metals and Materials Society, pages 131-147 (1998).
  8. M.L. Weaver, M.E. Stevenson, M. Shamsuzzoha, R.D. Ott and M.P. Brady, “Elastic and Plastic Properties of Gamma + Laves Phase In-Situ Composite Alloys Using Nanoindentation Techniques,” in High Temperature Ordered Intermetallic Alloys VIII, Materials Research Society Symposium Proceedings, v. 552, pages KK2.6.1-KK2.6.6, Materials Research Society, Pittsburgh, PA (1999).
  9. J.E. Jackson, A.L. Highsmith, M. Weaver, and T.S. Piwonka, “Materials Considerations for High Speed Ships,” in Proceedings of the Fifth International Conference on Fast Sea Transportation, Seattle, Washington, USA, 31 August – 2 September 1999.
  10. M.P. Brady, C.T. Liu, J.R. Keiser, P.F. Tortorelli, V.K. Sikka, E. Lara-Curzio, C.A. Walls, C.G. Westmoreland, C.A. Carmichael, J.L. Wright, J.D. Vought, M. Howell, H. Longmire, K.L. Crowley, and M.L. Weaver, “Development of Intermetallic-Reinforced and Oxide-Dispersion Ductilized Cr Alloys for Aggressive High-Temperature Environments,” in Proceedings of the Fourteenth Annual Conference on Fossil Energy Materials, Knoxville, TN (April 25-27, 2000), pages 5.5.1-5.5.10.
  11. F. Huang, W.S. Epling, J.A. Barnard, and M.L. Weaver, “Processing and Properties of Gamma+Laves Phase In-Situ Composite Coatings Deposited via Magnetron Sputtering,” in High Temperature Ordered Intermetallic Alloys IX, Materials Research Society Symposium Proceedings, v. 646, pages N5.24.1-N5.24.6, Materials Research Society, Pittsburgh, PA (2001).
  12. M.E. Stevenson, M.L. Weaver, and R.C. Bradt, “Microhardness Anisotropy and Indentation Size Effect (ISE) on the (100) of Single Crystal NiAl,” in High Temperature Ordered Intermetallic Alloys IX, Materials Research Society Symposium Proceedings, v. 646, pages N6.4.1-N6.4.6, Materials Research Society, Pittsburgh, PA (2001).
  13. M.L. Weaver and C.L. Hale, “Effects of Precipitation on Serrated Yielding in Inconel 718,” in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria editor, The Minerals, Metals and Materials Society, Warrendale, PA (2001), pages 421-432.
  14. M.P. Brady, I.G. Wright, I.M. Anderson, V.K. Sikka, E.K. Ohriner, C. Walls, G. Westmoreland and M.L. Weaver, “Ductilization of Cr via Oxide Dispersions,” in Proceedings of the 15th International Plansee Symposium, G. Kneringer, P. Rodhammer, and H. Wildner editors, Plansee AG, Reutte (2001), pages 108-1 – 108-13.
  15. M. P. Brady, I. M. Anderson, H. M. Meyer, L. R. Walker, M. K. Miller, D. J. Larson, V. K. Sikka, I. G. Wright, P. F. Tortorelli, J. R. Keiser, C. A. Walls and M. L. Weaver; “Management of nitrogen in chromium;” in Proceedings of the John Stringer Symposium on High Temperature Corrosion, Nov 5-8 2001; edited by P. F. Tortorelli, I. G. Wright and P. Y. Hou (Indianapolis, IN, United States: ASM International, 2001), pp. 95-105.
  16. X. Li, F. Huang, M. Curry, S.C. Street, and M.L. Weaver; ”Nanoindentation Response of Dendrimer-Mediated Soft Metallic Ultrathin Films,” in Materials Processing and Manufacturing Division Fifth Global Symposium; Surfaces and Interfaces in Nanostructured Materials and Trends in LIGA, Miniaturization and Nanoscale Materials, S.M. Mukhopadhyay, S. Seal, N. Dahotre, A. Agarwal, J.E. Smugersky, and N. Moody editors, The Minerals, Metals & Materials Society, Warrendale, PA (2004), pages 287-295.
  17. M.L. Weaver, “The Characterization and Performance of NiAl-Hf Coatings,” in Proceedings of Microscopy and Microanalysis 2004 (Microscopy and Microanalysis, volume 10, supplement 2, Cambridge University Press (2004)), Microscopy Society of America, Microbeam Analysis Society, and International Metallographic Society, Savannah, GA, August 1-5, (2004), pages 60-61. 
  18. Xiao Li, Feng Huang, S. F. Shuler, M. L. Curry, S. C. Street, and M. L. Weaver “Tailoring the Texture of Magnetron Sputtered Ta Films by Self-Assembled Dendrimer Sublayers,” in Surfaces and Interfaces in Nanostructured Materials II, Sharmila Mukhopadhyay, Narendra Dahotre, Sudipta Seal, and Arvind Agarwal editors, The Minerals, Metals & Materials Society, Warrendale, PA (2006), pages 103-111.
  19. C. Srivastava, G.B. Thompson, D. Reinhard, J. Sebastian, T.J. Prosa, D.J. Larson, Z.T. Reddy, S. Gupta, W. Butler, and M.L. Weaver, “Atom Probe Tomography of Al-Cu Precipitation in an Al-5 at.% Cu Thin Film,” in Proceedings Microscopy and Microanalysis 2006 (Microscopy and Microanalysis, volume 12, supplement 2, Cambridge University Press (2006)), Microscopy Society of America, Microbeam Analysis Society, and International Metallographic Society, Chicago, IL, July 30 – August 3 (2006).
  20. M.A. Bestor, A.L. Brown, R.L. Martens, B. Ning, M.K. Miller, and M.L. Weaver, “Microstructures and Properties of Dispersion Strengthened Bond Coats,” in Proceedings Microscopy and Microanalysis 2007 (Microscopy and Microanalysis, volume 13, supplement 2, Cambridge University Press (2007)), Microscopy Society of America, Microbeam Analysis Society, and International Metallographic Society, Fort Lauderdale, FL, August 5-9 (2007), page 1652CD.
  21. J.W. Woolley, M.A. Bestor, M.L. Weaver and K.A. Woodbury, “Obtaining the Sensed Temperatures From a Detailed Model of a Welded Thermocouple,” in 2008 Proceedings of ASME International Mechanical Engineering Congress and Exposition, IMECE 2008, Boston, MA, October 31, 2008 – November 6, 2008, Volume 10, Part A, (American Society of Mechanical Engineers, 2009) pages 649-655.
  22. N.W. Rimkus, M.L. Weaver and N. El-Kaddah, “Microstructure and Mechanical Behavior of Cast Mg AZ31B Alloy Produced by the Magnetic Suspension Melting Process,” in Magnesium Technology 2011, edited by W. Sillekens, S. Agnew S. Mathaudhu, and N. Neelameggham, (The Metals, Minerals, & Materials Society, Warrendale, PA) pages 119-124.

In Un-edited Confrence Proceedings and/or Reports: (One in Print)

  1. T.M. Butler and M.L. Weaver, “Investigation of the Microstructures and Oxidation Behavior of AlNiCoCrFe High-Entropy Alloys,” published in Materials Science and Technology Conference and Exhibition 2015, MS&T 2015, October 4, 2015 – October 8, 2015, vol. 2, pages 1257-1264 (2015).  ISBN-13: 9781510813939.  This proceeding was published as a CD-only volume.

Books or Book Chapters: (Two in Print)

  1. M.L. Weaver and M.E. Stevenson; “Introduction to the Mechanical Behavior of Non-Metallic Materials,” in ASM Metals Handbook, Volume 8, Mechanical Testing and Evaluation; H. Kuhn and D. Medlin (editors); Materials Park, OH; ASM International, pages 13-25 (2000).
  2. M.P. Brady, P.F. Tortorelli, K.L. More, E.A. Payzant, B.L. Armstrong, H.T. Lin, M.J. Lance, F. Huang, and M.L. Weaver, “Design Strategies for Oxidation-Resistant Intermetallic and Advanced Metallic Alloys,” in Novel Approaches to Improving High Temperature Corrosion Resistance; M. Schütze and W.J. Quadakkers (editors); Boca Raton, FL; CRC Press, pages 3-18 (2008).  ISBN-13: 9781845692384;  DOI: 10.1553/9781845694470.1.3.